Spectrum compatibility is defined on a per twisted pair basis for specific well-defined transmission systems. Spectrum Compatibility means the capability of two (2) copper loop transmission system technologies to coexist in the same cable without service degradation and to operate satisfactorily in the presence of cross talk noise from each other. Signal means any transmission of radio frequency energy or of optical information. Traffic control signal means a device, whether manually, electrically, or mechanically operated, by which traffic is alternately directed to stop and permitted to proceed. Upstream means carrying a transmission to the Headend from remote points on the Cable System or from Interconnection points on the Cable System. ![]() Network Operating Agreement means an executed agreement that contains the terms and conditions under which the Network Customer shall operate its facilities and the technical and operational matters associated with the implementation of Network Integration Transmission Service under Tariff, Part III. owned, directly or indirectly, by the Reference Entity. Interconnection is between a DSX or LGX to a Switch, another Cross Connection, or other service platform device.Ĭannabis waste means waste that is not hazardous waste, as defined in Public Resources Code section 40141, that contains cannabis and that has been made unusable and unrecognizable in the manner prescribed in sections 50 of this division.ĭownstream Affiliate means an entity whose outstanding Voting Shares were, at the date of issuance of the Qualifying Guarantee, more than 50 per cent. In locations where automated Cross Connection capability does not exist, DCS will be defined as the combination of the functionality provided by a Digital Signal Cross Connect (DSX) or Light Guide Cross Connect (LGX) patch panels and D4 channel banks or other DS0 and above multiplexing equipment used to provide the function of a manual Cross Connection. For such DCS, the requirements will be, at least, the aggregation of requirements on the "component" DCS. DCS may provide the functionality of more than one of the aforementioned DCS types (e.g., DCS 3/3/1 which combines functionality of DCS 3/3 and DCS 3/1). Types of DCS that cross connect Synchronous Transport Signal level 1 (STS-1 s) or other Synchronous Optical Network (SONET) signals (e.g., STS-3) are also DCS, although not denoted by this same type of nomenclature. This same nomenclature, at the appropriate rate substitution, extends to the other types of DCS specifically cited as 3/1 and 3/3. ![]() Types of DCS include but are not limited to DCS 1/0s, DCS 3/1s, and DCS 3/3s, where the nomenclature 1/0 denotes interfaces typically at the DS1 rate or greater with Cross Connection typically at the DS0 rate. Terminals means the Terminals set forth on Schedule A attached hereto.ĭigital Cross Connect System or "DCS" is a function which provides automated Cross Connection of Digital Signal Level 0 (DS0) or higher transmission bit rate digital channels within physical interface facilities. Unless otherwise agreed by the Parties, the CCS protocol used by the Parties shall be SS7. It is a special network, fully separate from the transmission path of the public switched network. Common Channel Signaling (“CCS”) is a method of digitally transmitting call set-up and network control data over a digital signaling network fully separate from the public switched telephone network that carries the actual call.Ĭommon Channel Signaling (CCS means an out-of-band, packet-switched, signaling network used to transport supervision signals, control signals, and data messages.
0 Comments
Leave a Reply. |